The silicon carbide Rod heating elements have a maximum power output of 2.5 kW on each of the 3 heating groups for the The power on each phase is electronically controlled which avoids manual regulation and increases the life of the heating elements.
The new EDR furnace has a stainless steel structure with insulated walls and a cooling system consisting of 3 fans that allow the flow of hot air towards the upper part of the furnace, thus facilitating suction. With this new thermal insulation, the external surface temperature of the furnaces does not exceed 50-90 °C.
This new model also has a slightly larger muffle compared to the previous version and can now accept up to 7 cupels per row; the EDR/10 cupels per row.
The silicon carbide Rod heating elements have a maximum power output of 2.5 kW on each of the 3 heating groups for the The power on each phase is electronically controlled which avoids manual regulation and increases the life of the heating elements.
The new EDR furnace has a stainless steel structure with insulated walls and a cooling system consisting of 3 fans that allow the flow of hot air towards the upper part of the furnace, thus facilitating suction. With this new thermal insulation, the external surface temperature of the furnaces does not exceed 50-90 °C.
This new model also has a slightly larger muffle compared to the previous version and can now accept up to 7 cupels per row; the EDR/10 cupels per row.
EDR – Rolling Press ( Patta Press)
Technical Data Sheet
- Power Supply : Three Phase
- Power : 1 Hp
- Overall Dimensions : 800x500x1400mm ( Lenght , Width , Height)
- Weight : 100Kg
- Roller size :5 x 2.5
- Roller Material : Stainless Steel
The silicon carbide Rod heating elements have a maximum power output of 2.5 kW on each of the 3 heating groups for the The power on each phase is electronically controlled which avoids manual regulation and increases the life of the heating elements.
The new EDR furnace has a stainless steel structure with insulated walls and a cooling system consisting of 3 fans that allow the flow of hot air towards the upper part of the furnace, thus facilitating suction. With this new thermal insulation, the external surface temperature of the furnaces does not exceed 50-90 °C.
This new model also has a slightly larger muffle compared to the previous version and can now accept up to 7 cupels per row; the EDR/10 cupels per row.
EDR – Table Drilling Machine
Technical Data Sheet
- Max. Drilling capacity 15mm
- Speeds :200RPM
- Spindle Run :75mm
- Column Diameter :70mm
- Distance From Column To Spindle Center :150 mm
- Max. Distance From Spindle To Table Surface :280mm
- Spindle : 275 – 2350
- Motor : 1/Phase and 3/ phase 0.5 Hp
- Weight : 50kg
EDR – Industrial Hot Plates
EDR Top plate and body made of steel. Temp. Up to 350°c fitted with energy regulator and thermostatic / digital controller, as per customer requirement.
- Body material stainless steel
- standard C* Meter
- Heating Element Important
- Auto power cut-off system
- with indicator light
EDR – Assaying Scale Weight
Balance Scale
- Maximum Capacity 120g/41 g
- 21 CFR Part 11 Yes
- Complaint Weighing
- Minimum Weight (USP, 0.1%, Typical) 4 Gm
- HCD ( High Contrast Display)
- Overload Protection
- Metal High – Grade chemical Resistant Die-Cast Housing.
EDR – Fume Hood And Scrubber
The hoods are made of self-extinguishing PPh and are equipped with internal lighting. and Control panel
Depending on the model, they can be equipped with:
- Two Hot multiple assaying plants,
- With Protective window glass
- One or more 2 Kw electric heaters able to handle 8 flasks each.
- Safety Hand Glows
- Flask washbasin
- Acid collection tank with PPH drain pipe. and PPH Ball valve.
- With Acid fume control scrubbing system
- Centrifugal Blower
- High chemical shower Vertical pump